Cultivation Principles – Cleavers

07.06.2018

Residue Management: Ensure even spread of residues across field and a good chop of straw to maximise herbicide efficacy and avoid unnecessary cultivations. Straw chopper knives need changing/reversing regularly – often 3 or more times a season.

Where appropriate (e.g. when direct drilling with appropriate drill into high residue levels) leave a longer stubble height. Stubble mulching of high stubbles can be used where straw needs time to become brittle after harvest.

Residue spreading and shallow stale seedbed cultivation by raking (multiple passes followed by glyphosate as needed) combined with surface rolling (for effective herbicide action, weed germination & slug management) and especially where delayed shallow discing/rolling is used, can be effective to manage residues, control slugs, and create the best conditions to stimulate weeds outside the crop. Depth to be only just greater than drilling depth of following crop, ideally ≤5cm. Consolidate after tillage to maintain moisture in the stale seedbed. Surface consolidation is essential after shallow tillage, and through to depth pressing plus surface consolidation is needed following deeper tillage. Timing of tillage is preferably later (ideally October), although this needs care when planning if other weed species are also present.

Maintain seed bank horizons by controlled surface disturbance of all operations. Mixing weed seeds to variable depths reduces efficacy of residual herbicides and prolongs the germination period for weeds.

Loosening as needed by low rake angle winged tines with adequate lift height for conditions and depth worked. This controlled vertical fissuring also minimises disrupting the weed seed bank horizons. Aim to establish a following crop ASAP after loosening (cover crop if spring drilling next main crop) to stabilise the resulting structure created.

NOTE: effective loosening is vital where structure is likely to reduce or inhibit moisture infiltration levels. Poor drainage reduces crop competitiveness, although poorly drained soils do not favour this weed. Consider headlands and the main field areas separately where loosening is needed as in many cases loosening depths are different, or not required across the whole field.

AT ALL COSTS avoid: (i) deep non- inversion mixing; (ii) re-inversion before 5 or more years; (iii) lower depths of disturbance when cultivating than during follow-on spring drilling, (iv) failure to consolidate after soil disturbance as this will lose moisture and adversely affect germination potential of the weed seeds.

Cleavers News